#Diy dredge nozzle how to
#Diy dredge nozzle generator
#Diy dredge nozzle full
#Diy dredge nozzle plus
#Diy dredge nozzle free

Attach several floats to the discharge hose and to the power cable so the lines are at the top of the water level and do not get caught up with the pump.Securely connect the discharge hose to the pump discharge nozzle.

#Diy dredge nozzle free

Connect the free end of the rope to the eyelet on the other end of the raft allowing for a little slack in the rope for movement.

Run the free end of the rope thru the pulleys on each side of the pond.

Connect the rope to one eyelet of the raft.

Secure the eye pulley to the eyelet of each stake.

Place an eyelet stake on each end of the pond on the shore.

Using the chain and clamps, connect the pump to the raft so the pump touches the bottom of the pond.

#Diy dredge nozzle generator

A DAE Pumps representative or local rental company can help you identify the right generator for the pump. The generator must be able to power the pump at startup and consistently run without interruption. Also, if the cord is too small you can potentially run one-half the width and then run the other half.įitting the pump with the right generator for power is essential. A skilled electrician will be able to connect and seal additional wiring that would be exposed to water if the cord is undersized. To ensure the cord length meets your requirements, measure the widest section of the pond. Most pumps come with 60-65 feet of 3-phase cord. See our sludge pump selection here!Īnother important aspect of the pump is the power cord. The sludge pumps are made of high chrome metals but wear parts are not as durable as the slurry pumps parts.

If cleaning out muck and sludge with minimal sediment, use a DAE Pumps sludge pump.

Visit DAE Pumps Slurry Pumps for our large selection. They tend not to clog or wear like standard types of pumps can. A slurry pump made with high chrome metal casings and parts is ideal for moving sediment. When selecting a submersible pump for dredging a pond, the pump should be capable of processing the material without clogging. The Silt-Bot has a little more limitation, for operating at depths between 2 to 11 ft. This mini pond dredge is powered by a 4” submersible pump that suctions a radius of about 12- to 18-inches. With stakes on both sides of the pond, lagoon, or another water area, the operator monitors the Silt-Bot from the shoreline with the handheld remote control. The Silt-Bot is on an electrical pulley system that moves forward/backward and up/down.

#Diy dredge nozzle full

With an extended arm, it can reach depths of 15 ft.Īnother option for reaching the full width and length of a pond is the Silt-Bot. As a small pond dredge, the Sediment Slayer is capable of accessing every area of a pond or waterway. wide sections at a time, providing quick and complete results with ease. This powerful system carves out over 5 ft. The Sediment Slayer is a ride-along pontoon dredge equipped with a 6” pump and 66” auger for agitation and breaking up material, then moving it away. Sometimes this can take a couple of days or a couple of weeks depending on the size of the pond. These well-designed systems can help pond owners complete the clean-up in a short time. The DAE Pumps pontoon dredges are floating dredges that have highly durable submersible slurry pumps for suctioning and moving material. Over time, the pond builds up with even more sediment, gets murkier, and becomes less desirable or dries up.

Years of neglect lessen the beauty and use of these ponds. Unfortunately, the sad result is that these pond owners never end up cleaning and lowering their ponds. Others resort to service companies for renovating the ponds for them. Unfortunately, many customers shy away from them because of the price even though they can rent them monthly at reduced costs. Attracted by the small and mini dredges DAE Pumps offers, like the Sediment Slayer and Silt-Bot, pond owners look towards these units to be able to reach the center and edges of the pond. These pond owners are in search of a product that can help them complete their job of cleaning and lowering their pond. A complete drain and excavation are likely out of the question for many of these pond owners. Pond owners resort to a variety of methods, like excavation to clean the outer area of the pond but cannot get to the center with the excavator’s arms reach. Looking to clean the pond and increase the water level by pond dredging, pond owners need to remove a couple of feet of sediment and recirculate in clean water without disturbing the current wildlife. Over time, ponds start to get filled up with sediment and if not constantly maintained, they get mucky and lose their water level.

#Diy dredge nozzle how to

They want to know how to dredge their large ponds.

#Diy dredge nozzle plus

Owners of a large acre plus pond need an economical solution for pond dredging and cleaning their prized watering holes.